Natural Venetian

Natural Venetian - Description

Remember to check out the useful measuring and fitting guide for guidance on the most suitable fitting options for your blinds!

Cord tilt on the left
Raise/lower cord on the right

What’s contained in the box:

• One wood slat blind
• One attachable colour matching wood valance
• Two end mounting brackets
• One centre support bracket (On Blinds over 100 cm wide)

Looking for the perfect fit?

We can trim the width and drop of your blind for an additional £12 per blind at the time of ordering. If you want to avail of this service, contact us on 0845 165 8338

Alternatively you can adjust the blind yourself.

To shorten the blind drop yourself, just can follow the following easy steps (full instructions will be contained in the box)

1. After fitting, lower your wood slat blind and check to see how much shorter you would like it to be, note the number of slats you need to remove
2. Remove the bottom rail buttons with your finger or a screwdriver
3. Cut off or untie the cord knot
4. Slide off the bottom rail and remove the required number of slats to shorten to your required drop
5. Replace bottom rail through ladder tape
6. Thread cords through bottom rail and tie knot
7. Cut off excess ladder tape and pull cord leaving 25mm of ladder tape to tuck into bottom rail button holes
8. Replace bottom rail buttons